1. What is IanniX?
  2. Download
  3. Showcase
  4. Research
  5. About

quantize/quantise/snap?

Home › Forums › Feedback › quantize/quantise/snap?

  • This topic has 4 replies, 4 voices, and was last updated 11 years ago by Jerome GB.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 22 August 2012 at 1 h 35 min #2273 Reply
    Anonymous
    Inactive

    Is it possible to snap/quantise notes/triggers in IanniX? What grids can be snapped to?

    For example, if I wanted a loop triggering a kick drum locked to the beat ..

    16 September 2012 at 12 h 53 min #2822 Reply
    Anonymous
    Inactive

    You can snap to the grid (with a grid of 1 sec).
    If you need more complex quantization, you can use the inspector and type directly the x/y values for the trigger coordinates.

    27 November 2013 at 18 h 26 min #3320 Reply
    Jerome GB
    Guest

    Hey, just bumping the subject, is there anyways to snap a trigger to a curve, with a relative ratio?
    By that I mean, if lets say my curve is (1,1,0) and I add a trigger at (0.5,1,0) that it would go to (1,1,0) if I extend my curve to (2,1,0) by changing a parameter?
    Thanks!
    Jerome

    27 November 2013 at 18 h 47 min #3324 Reply
    IanniX
    Keymaster

    Hey!

    Not possible — if I clearly understand your question:) —. The best you can do is during creation process:
    – add a curve
    – Inspector > Info > 3D Space > Resample
    – Check “Generate triggers”
    – Change the number of triggers you need
    – OK

    16 December 2013 at 19 h 17 min #3333 Reply
    Jerome GB
    Guest

    Thanks,
    Hard to use in a “live” sequence though!
    I’ll find a way around.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: quantize/quantise/snap?
Your information:




© IanniX Association

What is IanniX? | Download | Showcase | Forums | Research | About