1. What is IanniX?
  2. Download
  3. Showcase
  4. Research
  5. About

osc message address

Home › Forums › Making things with IanniX › osc message address

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 16 February 2013 at 12 h 52 min #2304 Reply
    Anonymous
    Inactive

    Is it possible to know the “default address used for trigger/cursors/transport” value?

    26 February 2013 at 16 h 13 min #2888 Reply
    Anonymous
    Inactive

    Hmm, not sure to understand your question…
    Default address is 127.0.0.1 and default port is 57120.

    28 February 2013 at 15 h 04 min #2889 Reply
    Anonymous
    Inactive

    Hi Guillame,

    Message Editor -> Send Through “Osc Message” -> To Address.

    There are 4 possibilities:

    1) /trigger – Default address used for trigger
    2) /cursor – Default address used for cursor
    3) /transport – Default address used for transport
    4) /iannix – Default address used to reach Iannix

    I don’t understand what are these default addresses (trigger, cursor, transport)

    1 March 2013 at 8 h 28 min #2890 Reply
    Anonymous
    Inactive

    Oh ok sorry.
    Do you often use OSC? In OSC protocol, you must specify an address and by default, we use /cursor for cursors, /trigger for triggers… and so on.

    Maybe you can have a look at OSC before to see how it works 🙂

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: osc message address
Your information:




© IanniX Association

What is IanniX? | Download | Showcase | Forums | Research | About